Start

Plate armours
Helmets
Type of finish*
Armour suites
Accessories
Other
My workshop

New

Contact

New


Helmet 171
price:

New




Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  Photo 7  Photo 8  


Helmet 170, one piece
price: 1250 euro + mailing costs

New




Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Helmet 169
price: 195 euro + mailing costs

New


The Norman helmet. The bowl comprised of two halves. It's hammered of 2mm steel. This product is welded. On request, I can do this model without welding (helmet hammered from a 1 piece of steel). Surface hammered and slighty polished, hemmering marks(*7).

Photo 1  Photo 2  Photo 3  Photo 4  


Helmet 168
price: 800 euro + mailing costs

New


Burgonet, first half of 17th century. It is based on preserved original. This helmet is welded in 2 parts, made of 2mm steel. Surface - hammered, blackened with a beeswax (*5).

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Breastplate 50
price: 600 euro + mailing costs.

New


Breastplate, end of 14th century. It is made of 1,5mm thick steel. Product is not welded. Product is not welded. Surface is hammered, blackened with a beeswax (*5)

Photo 1  Photo 2  Photo 3  Photo 4  


knife 16 with the sheath, steel 50 hf
price: 100 euro + mailing costs. In stock - 0 items

New


Forged, hardened knife with sheath. Spring steel 50 hf. The handling is made of wood and impregnated. Overall lenght of the knife is about 37 cm. The blade at its thickest point is about 5 mm and at its widest point about 39 mm.

Photo 1  Photo 2  


knife 15 with the sheath, steel 50 hf
price: 45euro + mailing costs. In stock 4 item.

New


Forged, hardened knife with sheath. Spring steel 50 hf. The handling is made of wood and impregnated. Overall lenght of the knife is about 21 cm. The blade at its thickest point is about 4,5 mm and at its widest point about 24 mm.

Photo 1  Photo 2  


Couters 20
price: 500 euro + mailing costs

New


Couters. Second half of 15th century. It is 1,5mm thick. This product is non-welded. Surface hammered, sanded, hammering marks (6*), additionaly there are some file marks also.

Photo 1  Photo 2  Photo 3  Photo 4  


Arms 15
price: 1750 euro + mailing costs

New


Three-part arm cover. Second half of 15th century. It is made of 1,5mm and 1,2mm thick steel. Product is non-welded. Surface hammered, sanded, hammering marks (6*), additionaly there are some file marks also.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Helmet 167, one piece
price: 1750 euro + mailing costs

New


Bascinet based on original. Helmet commonly used in 14th century. Bowl is made of one piece of steel - 2,5mm thick. Product is non-welded. Surface is hammered and sanded, there are hammer markings left (*6).

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  Photo 7  Photo 8  


Helmet 166, one piece
price: 1400 euro + mailing costs

New


Bascinet based on original. Helmet commonly used in 14th century. Bowl is made of one piece of steel - 2,5mm thick. Product is non-welded. Surface is hammered and sanded, there are hammer markings left (*6).

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  Photo 7  


Helmet 165
price: 450 euro + mailing costs

New


Spangenhelmet. Similar helmets are known of preserved originals from 6th century, but similar construction was used for another few hundred years. It is made of 2mm and 1,5mm thick steel. Hammered surface (*4). Product is not welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  


Gauntlets 27
price: 1200 euro + mailing costs

New


Gauntlets, second half of 15th century. They are based on preserved original. Product is not welded. 1.5mm, 1.2mm, 1.0mm thick steel sheet. Surface is hammered, sanded and there are hammer marks left (*6), additionaly there are some file marks also. Product is non-welded.

Photo 1  Photo 2  Photo 3  Photo 4  


Helmet 161, one piece
price: 1000 euro + mailing costs

New


Helmet in style of "Phrygian hat" inspired by iconography of end of 12th century. It is made of one piece of steel 2,5mm thick. Product is not welded. Surface is hammered and sanded, there are hammer markings left (*6).

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Helmet 164, one piece
price: 500 euro + mailing costs

New


Helmet crafted of one piece of steel. Used material is 2,0mm thick steel sheet. Cabasset, infantry helmet, 17th century, widespread in whole of Europe. This is price for its basic version - without cheeks covers, tube for feathers, and with the ordinary steel rivets. Steel covers for cheeks costs 30euro, fixing for feathers - 10euro. I can also replace steel rivets by brass rosettes for 1,5 euro per each. The whole is hammered, and then sanded and polished by hand(*2) + file marks. Product is non-welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Spearhead 7, C45 steel
price: 50 euro + mailing costs. In stock - 2 items.

New


Spearhead. It is made by hand of C45 steel, hardened. Total length is about 30cm, width of the blade around 4,5cm, casing diameter around 28mm. Blade edges are blunt, around 2mm. The weight is 390 gram. Considering processing by hand, individual item can differ a bit. Surface hammered, sanded, hammering marks (6*). Spearhead has welded blunt tip of 2cm in diameter.

Photo 1  Photo 2  


Spearhead 6, C45 steel
price: 45 euro + mailing costs. In stock - 2 items.

New


Spearhead. It is made by hand of C45 steel, hardened. Total length is about 28cm, width of the blade around 4,5cm, casing diameter around 28mm. Blade edges are blunt, around 2mm. The weight is 350 gram. Considering processing by hand, individual item can differ a bit. Surface hammered, sanded, hammering marks (6*).

Photo 1  Photo 2  


Forkiet, C45 steel
price: 75 euro + mailing costs. In stock - 10 items.

New


Hammered elementss for assembling furket, 16th - 17th century. It is entirely made by hand of C45 steel. The length of the upper part is 18 cm, and the lower part 12 - 13 cm. Inner dimension of cornet is around 25 mm. Surface hammered, sanded, hammering marks (6*). This product is non-welded.

Photo 1  Photo 2  


Helmet 163
price: 760 euro + mailing costs

New


Morion, end of 16th century. It is based on preserved original and the iconography. This is price for its basic version - without cheeks covers, tube for feathers, and with the ordinary steel rivets. Steel covers for cheeks costs 30euro, fixing for feathers - 10euro. I can also replace steel rivets by brass rosettes for 1,5 euro per each. This helmet is welded in 2 parts, made of 2mm steel. Surface is hammered, blackened with a beeswax (*5)

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Helmet 162
price: 275 euro + mailing costs

New


Phrygian helmet inspired by the iconography from the 12th-13th century. The bowl comprised of two halves. It's hammered of 2mm steel. On request, I can do this model without welding (helmet hammered from a 1 piece of steel). Surface hammered and slighty polished, hemmering marks (*7).

Photo 1  Photo 2  Photo 3  Photo 4  


Helmet 160
price: 540 euro + mailing costs

New


Morion, infantryman helmet from 17th century. This is price for its basic version - without cheeks covers, tube for feathers, and with the ordinary steel rivets. Steel covers for cheeks costs 30euro, fixing for feathers - 10euro. I can also replace steel rivets by brass rosettes for 1,5 euro per each. This helmet is welded in 2 parts, made of 2mm steel. Surface is hammered, sanded, there are hammer marks left (*6).

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Helmet 159, one piece
price: 470 euro + mailing costs

New


Skullcap with temple shields. Helmet crafted of one piece of steel. Used material is 2,0mm thick steel sheet. It was used in 15th century by the infantry. Surface hammered, blackened with beeswax (*5). This product is non-welded.

Photo 1  Photo 2  Photo 3  Photo 4  


Helmet 158, one piece
price: 385 euro + mailing costs

New


Helmet made of one piece of steel. The starting material is steel sheet 2,5mm thick. It was used in 15th century, mainly by the infantry. It was popular in whole of Europe. Surface hammered, blackened with beeswax (*5). This product is non-welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  


Couters 19
price: 150 euro + mailing costs

New


The elbow protection from the 14th century iconography. Made of 1.5mm thick steel. Surface is hammered and blackened with a bees wax (*5). This product is non-welded (made of one sheet of steel).

Photo 1  Photo 2  Photo 3  Photo 4  


Lower cannons of vambrace 18
price: 300 euro + mailing costs

New


Vambrace 17th century made in eastern style. It was used by armoured troops. Steel of 1,5mm thickness, riveted chainmail. Surface hammered and slighty polished, hemmering marks. (*7). Product is non welded.

Photo 1  Photo 2  Photo 3  


Lower cannons of vambrace 17
price: 120 euro + mailing costs

New


Vambrace, second half of 15th century. It is made of 1,2mm thick steel. Surface hammered, blackened with beeswax (*5). Product is non-welded.

Photo 1  


Helmet 157, one piece
price: 990 euro + mailing costs

New


A form of italian barbute, based on preserved bas-relief from year 1376. Deep bowl of the helmet indicates a high class of workshop in which it was made. On the same bas-relief one can find many of typical for that period bascinets (shallower). The bowl is made of one piece of 2,5 mm thick steel. Surface is hammered and sanded, there are hammer markings left (*6). Product is not welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  Photo 7  Photo 8  


Helmet 156
price: 220 euro + mailing costs

New


Similar helmets are known from preserved originals from 8th century. Basing on iconography one can assume that this type was used in even much later times as quite simple helmet used by not so wealthy ones. 2,0mm and 1,5mm thick steel. Hammered surface (*4). Product is non-welded.

Photo 1  Photo 2  Photo 3  Photo 4  


Breastplate 49
price: 960 euro + mailing costs

New


Breastplate, 16th century, based on preserved originals. It is made of 2,0mm and 1,5mm thick steel. Surface is hammered and sanded, there are hammer marks left (*6), additionaly there are some file marks also. Product is not welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Arms 14
price: 780 euro + mailing costs

New


Three-part arm cover. Second half of 15th century. It is made of 1,5mm and 1,2mm thick steel. Product is non-welded. Surface hammered, blackened with beeswax (*5).

Photo 1  Photo 2  Photo 3  


Spearhead 5, C45 steel
price: 39 euro + mailing costs. In stock - 4 items.

New


Spearhead. It is made by hand of C45 steel, hardened. Total length is about 27-28cm, width of the blade around 4,5cm, casing diameter around 28mm. Blade edges are blunt, around 2mm. The weight is 280-300 gram. Considering processing by hand, individual item can differ a bit. Surface hammered and slighty polished, hemmering marks (7*). Spearhead has welded blunt tip of 2cm in diameter.

Photo 1  Photo 2  


Spearhead 4, C45 steel
price: 35 euro + mailing costs. In stock - 15 items.

New


Spearhead. It is made by hand of C45 steel, hardened. Total length is about 25-26cm, width of the blade around 4,5cm, casing diameter around 28mm. Blade edges are blunt, around 2 mm. The weight is 240-250 gram. Considering processing by hand, individual item can differ a bit. Surface hammered and slighty polished, hemmering marks (7*). Product is non welded.

Photo 1  Photo 2  


Pauldron 25
price: 395 euro + mailing costs

New


Pauldrons made basing on preserved original from second half of 15th century. 1,2mm thick steel sheet. Product is non-welded. Surface hammered, blackened with beeswax (*5).

Photo 1  Photo 2  Photo 3  


Helmet 155
price: 495 euro + mailing costs

New


Kettle hat, half of 13th century. It is based on iconography of Maciejowski Bible. Helmet is made of 2mm thick steel. The whole is hammered, sanded and polished by hand (*2). Product is not welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  Photo 7  Photo 8  


Helmet 154
price: 250 euro + mailing costs

New


Kettle hat inspired by European iconography of 14th/15th century. Welded version. Steel sheet of 2,0mm and 1,5mm (brim) thickness. On request, I can make this pattern without welding (helmet made of one piece of steel). Hammered surface (*4).

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Helmet 153
price: 550 euro + mailing costs

New


Helmet in style of "Phrygian hat" inspired by iconography of end of 12th century. The bowl of the helmet is welded of two halves, 2mm thick steel. Steel rim and nasal are covered with thin decorative brass sheet. On request, I can make this pattern without welding (helmet made of one piece of steel). Surface is hammered and sanded, there are hammer markings left (*6).

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Spearhead 3, C45 steel
price: 55 euro + mailing costs. In stock - 8 items.

New


Spearhead. It is made by hand of C45 steel, hardened. Total length is about 33cm, width of the blade around 5cm, casing diameter around 3cm. Blade edges are blunt, around 2,5mm. The weight is 450 gram. Considering processing by hand, individual item can differ a bit. Surface hammered and slighty polished, hemmering marks (7*). Product is non welded.

Photo 1  Photo 2  


Spearhead 2, C45 steel
price: 45 euro + mailing costs. In stock - 0 item.

New


Spearhead. It is made by hand of C45 steel, hardened. Total length is about 30-31cm, width of the blade around 4,5cm, casing diameter around 3cm. Blade edges are blunt, around 2,5mm. The weight is 330-350 gram. Considering processing by hand, individual item can differ a bit. Surface hammered and slighty polished, hemmering marks (7*). Product is non welded.

Photo 1  Photo 2  


Breastplate 48
price: 1740 euro + mailing costs

New


Cuirass, 17th century, based on preserved originals. It is made of 2,0mm and 1,5mm thick steel. Surface is hammered and blackened with a beeswax (*5). Product is not welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  Photo 7  Photo 8  


Helmet 152
price: 360 euro + mailing costs

New


Helmet in style of "Phrygian hat" inspired by representation from Konrad Mazowiecki sigil. Bowl is made of two halves and welded. It is made of 2mm thick steel and the nasal of 2,5mm steel. Surface hammered, blackened with beeswax (*5).

Photo 1  Photo 2  Photo 3  Photo 4  


Helmet 151
price: 220 euro + mailing costs

New


Similar helmets are known from preserved originals from 8th century. Basing on iconography one can assume that this type was used in even much later times as quite simple helmet used by not so wealthy ones. 2,0mm and 1,5mm thick steel. Surface hammered, blackened with beeswax (*5). Product is non-welded.

Photo 1  Photo 2  Photo 3  Photo 4  


Buckle 44
price: 3,5 euro + mailing costs. In stock - 16 items.

New


Brass bifid buckle. It fits 15-16mm belt.

Photo 1  


Helmet 150, one piece
price: 825 euro + mailing costs

New


Cabasset, infantryman helmet, 17th century, widespread in whole of Europe. Surface is hammered and blackened with a beeswax (*5), additionally, before blackening the helmet was partially sanded. The whole is made of one piece of steel. Product is not welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  Photo 7  Photo 8  


Buckle 43
price: 5,5 euro + mailing costs. In stock - 10 items.

New


Brass, rectangular, bifid buckle. It fits 30mm belt.

Photo 1  


Buckle 42
price: 4,5 euro + mailing costs. In stock - 6 items.

New


Brass, rectangular, bifid buckle. It fits 25mm belt.

Photo 1  


Couters 18
price: 140 euro + mailing costs

New


The elbow protection from the 14th century iconography. Made of 1.5mm thick steel. Surface is hammered and blackened with a bees wax (*5). This product is non-welded (made of one sheet of steel).

Photo 1  Photo 2  Photo 3  


Breastplate 47
price: 500 euro + mailing costs

New


Breastplate, end of 14th century. It is based on preserved original and the iconography. It is made of 1,5mm thick steel. Product is not welded. Product is not welded. Surface is hammered, blackened with a beeswax (*5)

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6  


Gorget 18
price: 195 euro + mailing costs

New


Gorget, 17th century. It is 1,5mm thick. Surface is hammered and blackened with a bees wax (*5). Product is non-welded.

Photo 1  Photo 2  


Gorget 19
price: 195 euro + mailing costs

New


Gorget, 17th century. It is 1,5mm thick. Surface is hammered, sanded a bit and there are hammer marks left (*7). Product is non-welded.

Photo 1  Photo 2  


Gorget 17
price: 215 euro + mailing costs

New


Gorget, 17th century. It is 1,5mm thick. Surface is hammered and blackened with a bees wax (*5). Product is non-welded.

Photo 1  Photo 2  Photo 3  Photo 4  


Helmet 149
price: 415 euro + mailing costs

New


"Stromovka" - reconstruction of helmet from the lands of Great Moravia. There are 4 helmets of this type preserved, two in Stromovka, one in Gniazdow (Kievan Rus') and one in Bojná (Slovakia). Bojná exemplar has a nasal. Dating of this helmet accordingly to different sources: from 8th to 10th century. 2.0mm and 1.5mm thick steel. Hammered surface (*4). Product is not welded.

Photo 1  Photo 2  Photo 3  Photo 4  
Photo 5  Photo 6